• August 15, 2024
How to Clean GE Opal Ice Maker

How to Clean GE Opal Ice Maker

Is your GE Opal ice maker not producing as much ice as it used to? Or maybe you’ve noticed an unpleasant smell coming from the machine? If so, chances are that your ice maker needs a good cleaning.

Fortunately, keeping your GE Opal ice maker clean isn’t difficult—it only takes about 15 minutes! In this blog post, we’ll walk you through all the steps you need to take to keep your machine running smoothly and producing great-tasting, odorless cubes of ice.

Cleaning Inside the Ice Maker

The first step is to remove the ice bucket to access the inside of the machine. You can do this by pulling down on the lever located at the top of the machine.

Once you have access, use a soft cloth and warm water with mild detergent or vinegar to wipe down all interior surfaces. Be sure to get into all nooks and crannies, including around any buttons or levers.

When finished, rinse with warm water and dry with a soft cloth. It’s also important to periodically check for any buildup of lint or dirt on the condenser and fan blades. To do this, use a vacuum cleaner hose attachment or a soft brush to gently brush away any debris that may have accumulated over time.

Finally, make sure that the condenser coils are free from dust buildup; if necessary, use a coil brush for more thorough cleaning.

Cleaning Outside of Ice Maker

Next up is cleaning outside surfaces of your GE Opal ice maker. For this step, use a damp cloth and mild soap solution (or vinegar), then wipe down all exterior surfaces thoroughly.

Pay special attention to areas around knobs or buttons where dirt tends to accumulate over time. Don’t forget about wiping down any removable parts like drip trays too!

When finished with this step, be sure to dry everything off with a clean towel before replacing them back onto the machine.

Sanitizing Your Machine

The final step is sanitizing your machine in order to kill off any bacteria that may be lingering inside it after being cleaned out previously.

To do this, mix one tablespoon of chlorine bleach per gallon of water in an empty spray bottle (make sure it’s labeled “bleach”).

Spray this solution onto all interior and exterior surfaces until they are completely soaked—be careful not to overspray as it can damage electronics or plastic components if left on for too long!

Allow solution sit for 10 minutes before wiping away excess liquid with paper towels or other absorbent materials like rags; once finished let air-dry for another 5 minutes before replacing any removable parts back onto the unit itself.

Conclusion

Keeping your GE Opal ice maker clean is essential for its proper functioning and longevity—not just aesthetically but also from a health perspective too!

Cleaning should be done regularly (about once every 6 months) using warm water and mild detergent/vinegar solutions followed by sanitizing with chlorine bleach before air drying everything off afterwards; doing so will help ensure that your machine will remain in excellent condition while also producing great tasting cubes of ice that are free from odors or bacteria build-up! With these simple tips in mind, now you know how easy it is maintain your GE Opal Ice Maker – happy cleaning!

Leave a Reply

Your email address will not be published. Required fields are marked *