How To Assemble Frank Green Lid

Frank Green is a reusable coffee cup that comes with a lid. The lid is made up of three parts: the ring, the inner and the outer. The ring and the inner fit together and the outer screws onto the top.

How To Assemble Frank Green Lid

The lid of the Frank Green Smart Cup is held together by a few small screws. In order to assemble the lid, you will need a screwdriver. Start by removing the two screws on the side of the lid. Once the screws are removed, you can lift the top of the lid off. Inside the lid, you will find a small metal disk. This disk is what creates the seal between the lid and cup. Put the metal disk

-a frank green lid -a small Phillips head screwdriver -a medium sized flat head screwdriver -tape -a permanent marker

  • Use the included screws to fasten the pieces together
  • Fasten the metal band around the top of the lid
  • Align the frank green logo on top of the lid
  • Stack the bottom and top pieces of the lid together

-Be gentle when inserting the straw into the lid as it is fragile. -If the straw is not inserted all the way, it can fall out easily. -Make sure the silicone ring is in place before screwing on the lid.


Frequently Asked Questions

How Does Frank Green Straw Lid Work?

The frank green straw lid is a device that attaches to a reusable drinking straw and helps keep the straw clean. The lid has a small hole in the top that allows you to drink from the straw, and it also has a built-in filter that helps keep dirt and other debris from entering the straw.

How Does Frank Green Button Lid Work?

The Frank green lid is a leak-proof lid that is designed to replace traditional caps and lids on drink bottles. It is made from bamboo fibre and features a silicone seal that creates an airtight and watertight seal when closed. The lid can be opened with one hand and is dishwasher safe.

How Do You Clean A Frank Green Push Lid?

There are a few ways to clean a frank green push lid. One way is to soak the lid in warm, soapy water and use a soft cloth to wipe it clean. Another way is to use a damp cloth with a small amount of vinegar or lemon juice on it.


Wrap-Up

Putting the lid on a Frank Green cup is easy. Just line up the notches on the top of the cup with the tabs on the lid, then push down until you hear a click. To remove the lid, press down on one of the corners and lift up.

Leave a Comment

Your email address will not be published.