How To Change Blade On Ridgid Table Saw

Are you looking for a way to prolong the life of your table saw? A dull blade can quickly put an end to its service life.

Luckily, changing the blade on a Ridgid table saw is not as difficult as it sounds. In this article, we will show you step by step how to change the blade on this type of table saw. Read on and learn everything you need to know about changing the blade on a Ridgid table saw.

What Type Of Blade Should You Use?

When it comes to choosing the right blade for your table saw, the first thing to consider is the type of material you’re cutting.

There are two common materials that table saws are used to cut: wood and metal. The type of blade you use will impact the quality of your finished product. While there are many different types of blades out there, each designed for a specific purpose, you can use the following guidelines to choose the best blade for your job.

When cutting wood, select a blade with a carbide-toothed edge. These blades are designed for use on soft, hard, and tropical woods. While these blades leave a rougher finish than blades designed for cutting metal, they’re perfect for cutting wood that will be painted or stained.

When cutting metal, select a blade with a carbide-toothed edge and an induction hardened body. These blades are designed to create a smooth finish and prevent the blade from getting stuck in the cut.

Why Change The Blade On A Table Saw?

A dull table saw blade is not only a safety hazard, but it’s also really bad for your project. When you use a dull blade, you’re more likely to experience blade deflection, which causes the blade to bend as it tries to cut through your material. This deflection can cause the blade to come into contact with the surface of your project, damaging the surface and creating an uneven finish on your project. Even if you are careful, the extra pressure needed to cut through your material can cause the table saw to jump or skip, creating an uneven cut. A table saw with a dull blade can also overheat, causing the motor to burn out. A table saw with a dull blade is just not worth the risks.

How To Change Blade On Ridgid Table Saw

Changing the blade on a Ridgid table saw is a relatively straightforward task. However, before you change the blade, be sure to unplug the saw and wait for the blade to stop spinning. If the blade is still spinning, you’re more likely to get injured while changing the blade. To change the blade, follow the steps below: – Loosen the blade knob:

The first step is to loosen the blade knob by turning it counter clockwise. Depending on the model of table saw you own, you may need to use a hex wrench to loosen the blade knob.

Remove the blade guard: Remove the blade guard to access the arbor nut.

Loosen the arbor nut: Use a hex wrench to loosen the arbor nut. The arbor nut is located beneath the blade. Turn the hex wrench counter clockwise to loosen the arbor nut.

How Often Should You Change Your Saw’s Blade?

In general, you should change your blade after each project. However, since you’ll likely have multiple projects on the go, you may need to change your blade more often. It’s always a good idea to have a few extra blades on hand, especially if you work on a regular basis with wood. It’s important to change the blade on your table saw at the first sign of wear. If you try to complete a project with a dull blade, you run the risk of damaging the blade, the table, and even your project. A table saw with a dull blade is not only a safety hazard but also a waste of your time as you’ll need to use far more pressure to complete the same project a blade in good condition would handle with ease.

Conclusion

Change the blade on a table saw regularly, and you’ll greatly extend the life of your saw and reduce the risk of injury. A table saw blade is designed to last for only a few projects before it needs to be replaced. A table saw blade dulls quickly as it cuts through wood. When choosing a new blade, be sure to select one that’s designed for your project and the type of material you’ll be cutting. A table saw blade is a valuable tool and can make many jobs easier.

Leave a Comment