How To Clean Dexis Sensor

Dexis sensor is a key component of Dexis Platinum Imaging System. The sensor must be kept clean to ensure optimal image quality. Clean the Dexis Sensor with a soft, lint-free cloth moistened with isopropyl alcohol. Do not use any solvents or cleaning solutions.

How To Clean Dexis Sensor

Dexis is a digital x-ray detector that uses a sensor to capture images of the teeth. The sensor must be clean in order to produce accurate images. There are several ways to clean the Dexis sensor. One way to clean the Dexis sensor is to use a toothbrush and water. The toothbrush can be used to scrub off any debris or film that may have built up on the sensor. The water can be used to rinse off the brush and the sensor.

The tools and material needed for how to clean Dexis sensor are: -A toothbrush -Water -Mild soap -Isopropyl alcohol

  • Remove sensor from patient’s mouth
  • Rinse off any debris with water
  • Soak in cleaning solution for recommended time rinse off any debris with water air dry

– Disconnect the Dexis sensor from the computer. – Remove the cover of the Dexis sensor. – Soak a cotton ball in isopropyl alcohol and clean the lens of the Dexis sensor. – Wipe the sensor clean with a new cotton ball. – Reattach the cover to the Dexis sensor. – Reconnect the Dexis sensor to the computer.


Frequently Asked Questions

What Is The Proper Care For A Digital Sensor?

Clean the lens and sensor of your digital camera with a blower brush or compressed air. Use a lens cleaning cloth to gently wipe away any smudges or fingerprints from the lens. If you have a dirty sensor, use a Sensor Swab kit to clean it.

How Do You Clean A Digital Sensor?

You can clean a digital sensor with a microfiber cloth and a camera lens cleaning fluid.

What Is A Dexis Sensor?

A Dexis sensor is a small, handheld device used to take X-rays of teeth. It is easy to use and produces high-quality images.

How Much Does A Dexis Sensor Cost?

A Dexis sensor costs between $300 and $500 per sensor.

How Would You Disinfect A Digital Sensor?

Digital sensors, such as those used in cameras, can be disinfected by using a 50:50 alcohol and water solution. The sensor should be sprayed with the solution and then wiped clean with a lint-free cloth.


Wrap-Up

To clean the Dexis sensor, use a dry or slightly damp cloth to clean the surface of the sensor. Do not use any type of liquid cleaner or cleaning solution. If the sensor is dirty or stained, you may gently scrub it with a mild soap and water solution; however, make sure that the sensor is completely dry before using it again.

Leave a Comment

Your email address will not be published.