How To Clean Filter On Coleman Above Ground Pool

If you have a Coleman above ground pool, then you probably use the pool filter to keep the water clean. Over time, however, the filter can become clogged with debris and require cleaning. This guide will show you how to clean the filter on your Coleman above ground pool.

How To Clean Filter On Coleman Above Ground Pool

Cleaning the filter on a Coleman above ground pool is a fairly simple process. The filter must be removed from the pool and cleaned using a garden hose. The filter should be rinsed thoroughly to remove any debris or dirt that may have collected inside. It is also important to check the filter for tears or holes, as these can cause the filter to become clogged more quickly.

The tools you will need for this project include: -A filter cleaner -A bucket -A hose -Protective eyewear -Rubber gloves -Algae scrub brush -Muriatic acid (if needed)

  • Remove the filter cover
  • Loosen the clamp on the inlet pipe and remove the pipe lift out
  • Check the pressure gauge and make sure the filter is turned off
  • Remove the top of the filter housing

-Check the filter for any damage and remove any debris that may be blocking the filter -Make sure the pump is turned off and the hoses are disconnected from the filter -Unscrew the lid of the filter and remove the cartridge -Rinse the cartridge with a garden hose, making sure to remove all of the dirt and debris -Replace the cartridge and screw the lid back on -Turn on the pump and reattach the hoses to the filter


Frequently Asked Questions

How Do I Clean My Above Ground Pool Sand Filter Pump?

To clean your sand filter pump, first turn off the pump and unplug it from the outlet. Next, remove the top of the pump by unscrewing it. Once the lid is off, you should be able to see the filter. Remove the filter and wash it off with a hose. Be sure to let it dry completely before replacing it. Finally, reassemble the pump and plug it in.

How Do I Remove The Filter From My Coleman Pool?

To remove the filter from a Coleman pool, you first need to locate it. The filter is typically located at the bottom of the pool. Once you have found it, you can remove the lid and then the filter itself.

How Do You Clean A Coleman Above Ground Pool Filter?

To clean a Coleman above ground pool filter, you will need to remove the top and bottom covers of the filter. Next, you will need to remove the internal parts of the filter. Finally, you will need to rinse the parts under running water.


To Summarize

Cleaning the filter on an above ground pool is a relatively easy process. The first step is to remove the filter cover and locate the filter cartridge. The next step is to remove the FILTER CLEANING CLAMP from the top of the cartridge. After the clamp is removed, the cartridge can be removed from the filter housing. The final step is to rinse off the cartridge with a garden hose and replace it in the filter housing.

Leave a Comment