How To Clean Germguardian Air Filter

The GermGuardian AC4825 22” 3-in-1 Air Cleaning System with True HEPA Filter is a great way to clean the air in your home. Not only does it have a true HEPA filter, but it also has a pre-filter and activated carbon filter to help reduce allergies and asthma symptoms. The filters should be cleaned every six months for optimal performance.

How To Clean Germguardian Air Filter

The Guardian Technologies Air Filter is a device that helps clean the air in a room. It does this by trapping particles in the air, such as dust, pollen, and smoke. The filter also removes small particles of bacteria and viruses. The Guardian Technologies Air Filter comes with a special filter that needs to be replaced every 6-8 months. The filter can be replaced by removing the front of the device and replacing it with the new filter.

-Germguardian air filter -Cleaning supplies (i.e. water, paper towel, disinfectant)

  • Look for the arrows that indicate how to open the filter
  • Slide the cover open and dump out any debris rinse off the filter with water allow
  • Take the filter out of the machine and remove the outer cover

-Check the user manual to see what type of filter your GermGuardian uses. -There are several ways to clean a GermGuardian air filter, depending on the type of filter. -If your filter is a pre-filter, you can vacuum it. -If your filter is a carbon filter, you can rinse it with water. -If your filter is a HEPA filter, you should replace it every 6 months.


Frequently Asked Questions

How Long Do Germguardian Filters Last?

The GermGuardian filters typically last for 3-6 months, depending on the amount of use and the type of filter.

How Do I Reset Germ Guardian After Replacing Filter?

To reset the Germ Guardian, simply hold down the power button for 3 seconds until the light turns off.

How Long Does A Purifier Filter Last?

The lifespan of a purifier filter can depend on the type of filter, the size of the unit, and how often it is used. Typically, filters will last six to 12 months.


To Review

To clean the GermGuardian air filter, unplug the unit and remove the filter. Rinse the filter under running water, then shake off the excess water. Air-dry the filter completely before reinstalling.

Leave a Comment