Grease traps are an important part of your kitchen plumbing because they keep the grease and oils from going down the drain and clogging up the pipes. Grease traps should be cleaned at least every month, or more often if needed.
How To Clean Grease Trap Under Sink
Grease traps are devices that are installed under kitchen sinks in order to catch and collect grease, oil and food particles. The trapped material can then be removed and disposed of in a safe manner, rather than going down the drain and clogging up the plumbing. Cleaning a grease trap is not a difficult process, but it should be done on a regular basis in order to ensure that it continues to function properly. The first step in cleaning a grease trap is to remove the cover
-A bucket -An old toothbrush -Dish detergent -Water
- 5 minutes
- Pour a degreaser or enzyme cleaner into the trap and let it sit for 10
- Scrub the inside of the trap with a brush to
- Locate the grease trap under your sink and remove the cover
-Remove the trap and clean it with a degreaser or a cleaner designed for grease traps. -Rinse the trap and replace it. -Monitor the trap and clean it more often if it becomes clogged.
Frequently Asked Questions
How Do You Know When Grease Trap Needs To Be Cleaned?
Grease traps should be cleaned when they are full or when they accumulate a certain amount of grease, typically every two weeks.
What Happens When A Grease Trap Is Full?
A grease trap is a device used to capture grease and oils from wastewater before it enters the sewers. When a grease trap is full, it will need to be cleaned in order to prevent the build-up of fats, oils, and grease (FOG). FOG can cause blockages in the sewer system, leading to backed-up toilets and drains.
How Often Should A Grease Trap Be Cleaned Out?
Grease traps should be cleaned out every 3-6 months, depending on the size and usage of the trap.
Grease traps are an important part of a kitchen design, as they help to keep the kitchen sinks and drains free from clogs. However, they need to be cleaned on a regular basis to ensure that they are working properly. There are several ways to clean a grease trap, but the most common is to pour a cleaning agent down the drain and let it sit for a few minutes before flushing with hot water.