How To Clean Keg Pump

There are a few ways to clean a keg pump. One way is to use a cleaning kit that can be purchased from a homebrew store. This kit typically includes a dip tube brush, a long brush, and a cleaning tablet. The first step is to remove the dip tube from the keg and soak it in hot water with the cleaning tablet for about 15 minutes. Next, use the brushes to scrub the inside of the keg and the pump. Be sure to rinse the ke

How To Clean Keg Pump

A keg pump is a device used to draw beer from a keg. It is inserted into the keg and the pump is operated to create a vacuum, which draws the beer up through the hoses and out of the spout. Keg pumps are easy to use and make it easy to pour a draft beer. They are also portable, making them perfect for taking to parties or tailgates. To clean a keg pump, first remove the hoses from

-A keg pump -Bucket -Warm water -Dish soap -Scrub brush

  • Rinse all parts of the keg pump with warm water soap up the parts of the keg pump
  • Remove the keg pump from the keg
  • Disconnect the hoses from the keg pump

– Soak the pump in a cleaning solution overnight. – Use a brush to clean the inside of the pump. – Clean the outside of the pump with a cloth.


Frequently Asked Questions

How Do You Clean A Micro Matic Tap?

To clean a Micro Matic tap, you should disconnect the beer line and soak it in hot water mixed with a cleaning agent. You can then use a brush to scrub the faucet, and use a compressed air gun to clean out the beer line.

How Do You Flush A Keg Tap?

To flush a keg tap, turn the gas off and disconnect the line from the keg. Pour a pot of hot water over the faucet and let it run for a minute. Reconnect the line to the keg and turn the gas back on.

How Do You Clean A Keg Coupler?

The best way to clean a keg coupler is with a sanitizing solution. You can either use a commercial sanitizer or make your own from household ingredients.


Wrap-Up

Cleaning the keg pump is a relatively easy process. The pump can be disassembled and cleaned using a mild detergent and water. It is important to ensure that all parts are dry before reassembling the pump.

Leave a Comment