How To Clean Kegerator Faucet

To clean your kegerator faucet, disassemble the faucet and soak all of the pieces in a sanitizing solution. Once all of the pieces are clean, reassemble the faucet.

5 Steps to Clean Kegerator Faucet

Over time, beer lines and faucets can become clogged with yeast, bacteria, and mineral deposits. This can cause off-flavors in your beer and make it difficult to pour. To clean your kegerator faucet, disassemble the faucet and soak all of the parts in a solution of warm water and brewery cleaning solution. Use a soft brush to remove any stubborn deposits. Rinse all of the parts thoroughly with clean water before reassembling the faucet.

Cleaning a kegerator faucet is important for two reasons. First, it ensures that the beer flowing from the tap is clean and free of contaminants. Second, it helps to prolong the life of the faucet itself. Over time, buildup of beer residue and other materials can clog the faucet and cause it to malfunction. Regular cleaning will help to keep the faucet in good working condition.

Step 1: Turn Off The Gas Supply To The Kegerator

Before beginning to clean the kegerator faucet, it is important to turn off the gas supply to the kegerator. This will ensure that no gas is released while the faucet is being cleaned. Once the gas is turned off, the next step is to remove the keg from the kegerator and place it in a safe location. With the keg removed, the faucet can now be cleaned.

Step 2: Disassemble The Faucet By Unscrewing The Knob, Washer And Bonnet

To clean your kegerator faucet, unscrew the knob, washer and bonnet. Remove any debris that may be lodged in these parts and give them a good scrub with a brush or cloth. Rinse thoroughly and reassemble the faucet.

Step 3: Remove Any Built Up Beer Sediment From Inside The Faucet Body With A Brush

1. Use a brush to remove any built up beer sediment from inside the faucet body. 2. Rinse the faucet body thoroughly with water. 3. Repeat steps 1 and 2 as needed until the faucet body is clean.

Step 4: Reassemble The Faucet, Making Sure To Tighten All Screws Securely

1. Unscrew the tap handle from the faucet body. 2. Remove the washer and O-ring from the tap handle and discard them. 3. Insert the new washer and O-ring into the tap handle. 4. Screw the tap handle back onto the faucet body. 5. Tighten the screws on the tap handle until they are snug.

Step 5: Attach A Faucet Brush To The End Of A Hose And Run Water Through The Faucet Several Times To Remove Any

To clean your kegerator faucet, start by attaching a faucet brush to the end of a hose. Run water through the faucet several times to remove any dirt or debris that may be clogging it. Be sure to also clean the inside of the kegerator faucet with the brush, taking care to reach all the nooks and crannies. Rinse everything off well when you’re finished.


Frequently Asked Questions

How Do You Clean A Keg Tap?

To clean a keg tap, disassemble the tap and soak all of the parts in a cleaning solution overnight. Rinse the parts with hot water, reassemble the tap, and then sanitize it with a sanitizing solution.

Can You Soak Keg Taps?

Yes, you can soak keg taps in a cleaning solution overnight to clean them.

How Do You Clean A Beer Dispenser?

To clean a beer dispenser, you will need to empty it and disassemble it. Clean the inside with a sanitizing solution and scrub brush. Rinse well and dry completely before reassembling.

How Do You Clean A Keg Valve?

To clean a keg valve, remove the valve from the keg and disassemble it. Soak the valve body and o-rings in a cleaning solution, such as PBW, for 30 minutes. Rinse the valve with water and reassemble.

How Do You Clean A Kegerator Spout?

To clean the kegerator spout, remove the tap handle and use a brush to scrub the inside of the spout. Rinse with warm water and reattach the tap handle.

How Do You Flush A Keg Tap?

To flush a keg tap, open the tap and let the beer flow out until it is clear. Then, close the tap and open it again to let the water flow out.


To Review

Assuming you would like a brief summary on how to clean a kegerator faucet: The best way to clean a kegerator faucet is by taking it apart and soaking all of the parts in a vinegar and water solution. After soaking, scrub the parts with a soft brush to remove any build-up and then rinse everything off with hot water. Reassemble the faucet and then run hot water through it to remove any vinegar residue.

Leave a Comment