How To Clean Nuface Device

Keeping your Nuface device clean is essential for its performance and longevity. After all, nobody wants to use a device that’s covered in dust and dirt. Fortunately, with a few simple steps, you can keep your Nuface device looking and working like new.

This step-by-step guide will walk you through the cleaning process, so you can get the most out of your device. From preparing to cleaning, you’ll be able to get your Nuface device looking as good as new. With the right cleaning products and a bit of patience, you’ll be able to enjoy your device for years to come. So, let’s get started!

Preparing to Clean Your Nuface Device

Before you even touch your device, there are a few things you should do. First, make sure the device is off. This will ensure you don’t accidentally turn the device on while cleaning it, which can damage the electrodes. Next, disconnect the device from the wall. This way, you won’t accidentally make unwanted changes to your settings while cleaning. Finally, make sure you have your cleaning supplies nearby. You’ll want to have a soft cleaning cloth handy, along with alcohol wipes. You can also use a small amount of dish soap and warm water, but alcohol wipes are generally more effective. To make sure nothing gets left behind, you may also want to have a pair of latex gloves on hand.

Cleaning the Device’s Head

First, wipe the device’s electrodes with the alcohol wipes. Be careful not to press down too hard, as this can damage the device. Next, wipe away any hairs or debris on the device’s head with the cloth. You’ll want to be careful not to get any water or cleaning products near the device’s head. Doing so can damage the device’s electrodes. Now, clean the inside of the device’s head with a cotton swab and warm water. Make sure not to get any water near the electrodes. Take special care to wipe away any dirt or debris from the grooves in the device’s head. Finally, pat the device’s head dry with the cloth.

Cleaning the Handle

First, wipe the device’s handle with the alcohol wipes. You’ll want to make sure to clean the buttons and slider, as well as the inside of the handle. Pay special attention to the grooves near the buttons, as dirt and grime have a tendency to get stuck there. Next, wipe down the outside of the handle with the cloth. Make sure to get any excess water off the handle, as water and electronics don’t mix. Now, wipe out the inside of the handle with a cotton swab and warm water. Be careful not to get any water near the slider, as this can damage the device. Finally, pat the handle dry with the cloth.

Wiping Down the Device

You’ve already cleaned the device’s head and handle. Now, it’s time to clean the rest of the device. Start by wiping the charging port. Make sure to remove any hairs or lint from the port, as this can damage the device. Next, wipe the outside of the device with the alcohol wipes. Now, wipe down the inside of the handle with the cotton swab and warm water. Be careful not to get any water on the outside of the handle. Next, wipe down the outside of the device with the cloth. Finally, pat the device dry with the cloth.

Drying the Device

To dry the device, wipe down the inside and outside of the device with paper towels. Make sure to get any excess water off the device, as this can damage the device. You may also want to use a hair dryer to speed up the drying process. Just make sure to keep the dryer at least eight inches from the device to avoid damaging it. Now, put the device back together and plug it in to charge. This will help it dry quicker and extend its lifespan.

Caring for the Device’s Rechargeable Battery

You’ve cleaned the electrodes and wiped down the device. Now, it’s time to care for the battery. To do this, unplug the device from the wall and wipe down the battery pack with the alcohol wipes. Next, wipe down the battery pack with the cloth. Make sure to get any water or cleaning product off the battery. Now, pat the battery pack dry with the cloth. You can also use a hair dryer to speed up the drying process. Next, plug the device back in and let it charge. This will help keep the battery clean and running at peak capacity.

Disinfecting the Device

Before you put the device back together, you’ll want to disinfect the device. This will help kill any bacteria or germs that may have gotten on the device while you were cleaning it. To do this, wipe down the device with 70% isopropyl alcohol wipes. Be sure to get any excess water off the device. Now, you’re ready to put the device back together.

Storing the Device Properly

Now that your device is clean, it’s time to put it away. The first thing you’ll want to do is disconnect the device from the wall. Next, put the device back together and wrap it in a microfiber cloth. This will protect the device while storing it. You can also put the device in a plastic bag, or store it in another clean, cloth bag. Now, find a safe place to store the device. Make sure to avoid humidity, extreme temperatures, and direct sunlight. The best place to store the device is in a dry, cool place, like a closet or drawer. The device will stay clean and ready to use when you need it.

Troubleshooting and Maintenance

If your device isn’t working after cleaning it, there may be something wrong with it. Before you panic, make sure you’ve followed all of these cleaning steps. If you’ve done everything correctly, and your device still isn’t working, there may be something wrong with it. In this case, you’ll want to contact NuFACE. Most likely, they’ll walk you through a few troubleshooting steps to see what’s wrong with your device. Now, if everything is working correctly, you can maintain your device by keeping it clean. You can do this by cleaning your device once a month. This will help extend the device’s lifespan and keep it working like new.

Conclusion

Cleaning your Nuface device isn’t hard, but it is important. This can help extend the device’s lifespan and keep it working like new. With the right cleaning supplies, like alcohol wipes and a soft cloth, you can easily clean your device. All you have to do is follow these simple steps, and you’ll have a clean device in no time.

Leave a Comment