A synthetic gun stock is made of a man-made material and is less likely to absorb moisture than a wooden stock. For this reason, it does not need to be oiled as often as a wooden stock. However, it should still be cleaned occasionally with a mild detergent and water. First, make sure the gun is unloaded and that there is no ammunition in the vicinity. Then, using a damp cloth, wipe down the entire stock, including the barrel and receiver. Be sure
Synthetic stocks are growing in popularity for their lightweight feel and affordable price. But if you’re like most avid hunters, you may cringe at the thought of adding a synthetic stock to your gun. Synthetic stocks tend to get oily and grimy more easily than wood stocks, right?
That is correct. Synthetic stocks have oils that help in giving them a natural-looking finish. These oils can trap dirt, dust, sweat or other debris very easily. This article will detail some great tips on how to clean synthetic gun stock effectively without damaging the material.
How To Clean Synthetic Gun Stock
What You Will Need
- Soft sponge or brush
- Rubber gloves
- Synthetic-safe cleaner
- Microfiber cloth
- Bowl of warm water and dish soap
- Synthetic gun stock conditioner
- Paper towels
- Gun oil
Synthetic gun stocks are extremely porous, which means they are very easy to clean. A great way to start is with a dry brush. Since synthetic stocks tend to trap dirt easier, dry brushing can help to remove any trapped dirt. Dry brushing is also great for loosening bacteria, dirt and grime from crevices and grooves that are difficult to clean with a sponge or rag. When cleaning a synthetic gun stock, use a soft bristled brush. Avoid stiff bristles as they can cause damage to synthetic gun stocks.
Dish Soap and Water
If you’re cleaning your synthetic stock after intense use, you might want to go with a general soap and water approach. Dish soap is a great option for cleaning synthetic gun stocks of dirt, grime and bacteria. To clean your synthetic gun stock, fill a bowl with warm water and dish soap. Swoosh your stock in the soapy water to allow the soap to break down the oils and dirt. After a few minutes, rinse the gun stock with cold water to help seal the pores and trap water inside the stock. If you feel like you need to go a bit further than dish soap, you can go with a synthetic-safe cleaner. These cleaners can help to remove and loosen the dirt and oil.
If you’ve tried the dish soap and water cleaning method and felt that you didn’t remove all the oils and grime, you can go with a synthetic-safe cleaning agent. A synthetic-safe cleaning agent can help to break down sticky oils and dirt that did not come off with the dish soap. Cleaners vary in strength, so make sure to read the instructions before using.
Synthetic Stock Conditioner
As stated above, synthetic stocks can trap dirt and oils very easily. But synthetic stocks are also porous and can trap bacteria and cause stains. To prevent bacteria and stains from setting in, you can go with a synthetic stock conditioner.
Stock conditioners help to trap water, bacteria and oils so they cannot harm the synthetic material. Stock conditioners also help to prevent stains, especially if you go with a UV protective conditioner. It is a great option if you like to go out in extreme weather like rain or snow. Stock conditioners coat the synthetic material to prevent water from going inside the pores of the gun stock and causing damage. Stock conditioners are especially useful for hunters who are out in extreme weather for long periods of time.
Synthetic gun stocks are great for avid hunters and shooters who have a tendency to sweat. But, they can also trap dust, dirt and other debris if not cleaned properly. This article details some great ways to clean synthetic gun stocks. From dry brushing, to general soap and water cleaning, to synthetic-safe cleaning agents, there are plenty of options to keep your synthetic gun stock looking new.