How To Connect Galvanized Pipe Without Threads

Galvanized pipe is often threaded to join two pieces together, but sometimes it’s not possible or convenient to use threads. In these cases, a connector can be used to join the two pieces of pipe without threads. There are many different types of connectors available, so it’s important to choose the right one for the job. One common type of connector is a compression fitting. This fitting has a nut and a ferrule (a metal ring) that squeezes the pipe

How To Connect Galvanized Pipe Without Threads

There are a few ways to connect galvanized pipe without threads. One way is to use a coupling. A coupling is a fitting that has two threaded ends. Another way to connect galvanized pipe without threads is to use a union. A union is a fitting that has three threaded ends. The third way to connect galvanized pipe without threads is to use a compression fitting. A compression fitting has a threaded end and a compression end. The compression end is clamped onto the pipe using a

-a pipe wrench -a hammer -a screwdriver -pipe cleaner -Teflon tape

  • File any burrs or rough edges from the cut end of the pipe
  • Measure the length of pipe needed and cut with a hacksaw
  • Strip off about 1/2″ of insulation from the end of the pipe

– Use a pipe coupling to join galvanized pipes without threads. – Slip a coupling over each pipe and tighten the screws until the coupling is secure. – If needed, use plumber’s tape on the threads of the pipes to ensure a watertight seal.


Frequently Asked Questions

Can Sharkbites Be Used On Galvanized Pipe?

There is some disagreement in the plumbing community about whether or not SharkBites can be used on galvanized pipe. Some plumbers say that the SharkBites will work just fine on galvanized pipe, while others say that it is not recommended because the zinc in the galvanized pipe can corrode the copper in the SharkBites. There is no definitive answer, so it is best to consult with a local plumber to see what they recommend.

How Do You Join Two Galvanized Pipes?

You can join galvanized pipes using a coupling. A coupling is a fitting that allows you to join two pipes of the same diameter.

How Do You Splice Galvanized Water Pipes?

Water pipes are often galvanized in order to protect them from rust and corrosion. In order to splice two galvanized water pipes together, you will need to use a coupling. The coupling has both male and female ends, and it will fit over the ends of the two pipes. Once the coupling is in place, use a pipe wrench to tighten it down. This will create a watertight seal between the two pipes.

Why Do Plumbers Not Like Sharkbite Fittings?

Plumbers do not like SharkBite fittings because they can be difficult to use and can lead to leaks.


In Summary

Galvanized pipe can be connected without threads by using a coupling or a connector. The coupling is inserted into one end of the pipe and the connector is inserted into the other end of the pipe. The connector has a threaded end that screws onto the coupling.

Leave a Comment

Your email address will not be published.