How To Connect To Galvanized Pipe Without Threads

Galvanized pipe is a great way to connect water lines and other piping in your home, but it can be difficult to connect to without the proper fittings. Here’s a quick guide on how to connect to galvanized pipe without threads. To connect to galvanized pipe without threads, you will need a piece of rubber hose that is long enough to reach from the pipe to the fitting you are using. Cut the hose so that it is slightly smaller than the diameter of

How To Connect To Galvanized Pipe Without Threads

Galvanized steel pipe is often used in plumbing applications because it is durable and corrosion-resistant. However, unlike copper or PVC pipes, galvanized steel does not have threads and cannot be connected using standard fittings. Instead, a special connector called a galvanized nipple must be used to join two galvanized steel pipes. A galvanized nipple is a short piece of pipe with male threads on one end and female threads on the other. It can be attached to either end of a galvan

-A pipe wrench -A hacksaw -Tape measure -Pipe cleaner or wire brush

  • Cut a piece of galvanized pipe to the desired length using a hacksaw
  • File the cut end of the pipe smooth
  • Apply teflon tape to the pipe threads. twist a fitting onto the pipe

– use a coupling or connector if you don’t have the proper fittings – make sure the pipe is clean and free of debris or rust – use Teflon tape on the threads of the connector to create a watertight seal


Frequently Asked Questions

How Do You Join Two Galvanized Pipes Together?

You can join two galvanized pipes together by using a coupling. A coupling is a connector that has two threaded ends. You can use a coupling to join two galvanized pipes together by screwing the two threaded ends of the coupling onto the threaded ends of the pipes.

Can Sharkbites Be Used On Galvanized Pipe?

SharkBites can be used on galvanized pipe, but it is not recommended. The adhesive can cause the zinc coating to flake off the pipe.

How Do You Connect Two Pieces Of Galvanized Pipe?

To connect two pieces of galvanized pipe use a coupling. The coupling will have a male end and a female end. The male end will fit over the end of one pipe and the female end will fit over the end of the other pipe.

How Do You Connect Galvanized Pipes Without Threads To Pvc?

You can use a coupling to connect galvanized pipes without threads to PVC.


To Summarize

Galvanized pipe can be attached to other galvanized pipe without threads by using a coupling. A coupling is a metal or plastic fitting with screw threads on both ends that can be used to join two pieces of threaded pipe together.

Leave a Comment

Your email address will not be published.