How To Cut Kerdi Shower Pan

Kerdi shower pan is a waterproofing membrane that is used to create a watertight shower base. The pan is cut to size and then the Kerdi membrane is attached to the top. The membrane can be cut with a utility knife or scissors.

How To Cut Kerdi Shower Pan

There is no one-size-fits-all answer to this question, as the best way to cut a kerdi shower pan may vary depending on the individual project. However, some tips on how to cut a kerdi shower pan include using a wet saw or tile saw, making sure the blade is sharp, and being careful to avoid any cracks or chips in the surface of the pan. Additionally, it is important to have a straight edge and level surface on which to work.

-Kerdi shower pan -Circular saw -Chop saw -Tape measure -Plywood -Paint or a sealant

  • Measure the dimensions of the shower pan and mark the outline with a pencil
  • Smooth the edges of the shower pan
  • Wear safety goggles and a dust mask while cutting
  • Cut the shower pan using a wet saw

below -A wet saw is the best tool for making straight cuts in kerdi shower pan. -Before cutting, measure and mark the cut line with a sharpie. -If you’re using a circular saw, always use a blade designed for cutting plastic. -Make sure your blade is sharp – a dull blade will cause the plastic to melt. -Cut slowly and steadily, applying even pressure. Don’t try to rush through the cut. -If necessary,

Frequently Asked Questions

Can I Cut Down A Kerdi Shower Pan?

Yes, you can cut down a Kerdi shower pan. You will need to use a wet saw to make the cuts and you will want to make sure that you are precise with your measurements.

Can You Cut Shower Tray?

It is possible to cut a shower tray, but it is not recommended. The edges of the tray can be sharp and dangerous. If you do decide to cut the tray, use a saw or other cutting tool that will create a smooth edge.

Can A Schluter Shower Bench Be Cut To Size?

A Schluter shower bench can be cut to size, but it is not recommended. The bench is designed to be a certain size for a reason, and cutting it could compromise its stability and function.


There are a few ways to cut a kerdi shower pan. The easiest way is to use a wet saw with a diamond blade. You can also use a circular saw or hacksaw.

Leave a Comment

Your email address will not be published.