How To Cut Old Cast Iron Sewer Pipe

Cast iron sewer pipe was common in the early 20th century, but is now being replaced by PVC pipe. Cast iron pipe is brittle and can easily be cut with a hacksaw.

How To Cut Old Cast Iron Sewer Pipe

Cast iron pipe is often used in sewer systems because it is durable and can withstand high pressure. However, over time this type of pipe can corrode and develop leaks. If you need to cut cast iron pipe, you can use a standard hacksaw blade or a reciprocating saw. If you are using a hacksaw blade, be sure to use a blade that is designed for cutting metal. Cut the pipe from one end to the other, being careful not to cut into the

Cast iron pipes are durable and can last for years when properly maintained. However, at some point they may need to be replaced. One way to do this is by cutting the pipe using a hacksaw. You will also need a chisel and a hammer to remove the old pipe.

  • Clean off any burrs or sharp edges with a file
  • Wear gloves and safety glasses
  • If the pipe is too long, use a pipe cutter to shorten it
  • Use a hacksaw to cut the cast iron pipe

– Cut the old cast iron sewer pipe using a reciprocating saw fitted with a metal-cutting blade. – Make sure that the blade is sharp and that you are using the correct type of saw for the job. – Apply steady pressure while cutting, being careful not to let the blade bind. – If possible, use a helper to hold the pipe steady while you cut.


Frequently Asked Questions

How Do You Cut An Old Sewer Pipe?

There are a few ways to cut an old sewer pipe. One way is to use a hacksaw. Another way is to use a cutoff wheel on an angle grinder.

How Do You Cut A Drain Pipe?

There are a few ways to cut a drain pipe. One way is to use a hacksaw. Another way is to use a PVC cutter.

What’S The Best Way To Cut Cast Iron?

There is no definitive answer to this question as the best way to cut cast iron may vary depending on the specific situation. However, some of the most common methods for cutting cast iron include using a hacksaw, sawzall, or grinder.

How Do You Cut Black Plastic Drain Pipe?

To cut black plastic drain pipe, you need to use a hacksaw. You can also use a utility knife, but it will be more difficult.

How Do You Cut Old Cast Iron Plumbing?

There are a few ways to cut old cast iron plumbing, but the most common is to use a reciprocating saw with a metal-cutting blade.

What’S The Best Thing To Cut Cast Iron With?

There is no definitive answer to this question as different people have different preferences. Some may say that a sharp, fine-toothed saw is the best way to cut cast iron, while others may recommend using a hacksaw or chisel. Ultimately, it comes down to what works best for the individual.


To Summarize

Cutting old cast iron sewer pipe can be a difficult process. First, the pipe should be cleaned and inspected for any damage. Once it is confirmed that the pipe is in good condition, a saw can be used to cut the pipe. A hacksaw or reciprocating saw work best for this purpose.

Leave a Comment

Your email address will not be published.