It is possible to drywall over wallpaper, but it is a difficult process. The wallpaper must be removed and the wall must be cleaned and prepared before the drywall can be installed.
How To Drywall Over Wallpaper
There are a few ways to drywall over wallpaper. One is to score the wallpaper with a utility knife and then spray the wall with water. Once the wallpaper is wet, you can peel it off fairly easily. Another option is to cover the wallpaper with a layer of joint compound. Then, after the joint compound dries, you can sand it and paint over it.
-Tape measure -Paint roller and tray -Paint brush -Paint scraper -Razor blade or sharp knife -Drywall screws -Staple gun and staples -Circular saw or handsaw -Cordless drill -1 inch hole saw -Drywall saw -Level -Tin snips -Hammer -Nail set
- Place the drywall over the mud and press into place use a putty
- Measure and cut drywall to size
- Apply a layer of drywall mud to the wall
- Remove all wallpaper
If you’re looking to patch and repair drywall, or are working on a brand new installation, learning how to drywall over wallpaper can come in handy. Here are a few things to consider: -Wallpaper can be difficult to remove, so it’s best to try to score and peel it before you start. If that’s not an option, start by cutting through the top layer of paper with a razor blade. -Once the wallpaper is removed, make sure
Frequently Asked Questions
Will Drywall Mud Stick To Wallpaper?
Yes, drywall mud will stick to wallpaper.
Can I Spackle On Top Of Wallpaper?
Yes, you can spackle on top of wallpaper. However, if the wallpaper is not properly adhered to the wall, the spackle will not adhere to the wallpaper and will eventually fall off.
How Can I Cover Wallpaper Without Removing It?
There are a few ways to cover wallpaper without removing it. One way is to use a primer and then paint over the wallpaper. Another way is to use a wallpaper adhesive and then put up new wallpaper on top of the old.
Taking Everything Into Account
To drywall over wallpaper, you will need to remove the wallpaper and apply a layer of drywall compound. Once the compound has dried, you can then sand and paint the surface.