How To Install Kitchen Cabinet Door Hinges

Installing kitchen cabinet door hinges may seem like a daunting task, but with the right tools and instructions, it can be a relatively easy job. The first step is to remove the old hinges from the cabinet doors and doors frames. This can usually be done by unscrewing them. Next, measure and mark where the new hinges will be installed on the doors and frames. Then, drill pilot holes where the screws will go. Finally, install the new hinges by screwing them into place

How To Install Kitchen Cabinet Door Hinges

Kitchen cabinet door hinges come in different sizes and shapes. Before you go out and purchase new hinges, you need to measure the current hinges on your cabinet doors. This will help you purchase the correct size and type of hinge. There are two types of hinges- concealed and exposed. Concealed hinges are used more often because they are hidden from view. They are attached to the cabinet door with screws and the hardware is hidden behind the door. Exposed hinges are attached to the

-Tape measure -Paint or wood primer -Paintbrush -Ruler or a straight edge -Cabinet door hinges -Screwdriver -Level -Hammer -Paint or wood finish of your choice

  • Use a drill to
  • Measure the width and height of the new hinges
  • Remove the old hinges from the cabinet door and door frame
  • Mark where the holes for the screws will go on the door and door frame

-Read the instructions that come with the hinges. -Determine where you want the hinges on the door. You will want to mark this spot on the door with a pencil. -Take the door off of its hinges and lay it flat on a surface. -Position the hinges so that the holes line up with where you marked the door. -Use a drill to drill pilot holes into the door. -Insert screws into each hole and tighten them.


Frequently Asked Questions

How Do You Put Hinges On A Cabinet Door?

To put hinges on a cabinet door, first measure the width and height of the door. Then, use a drill to make pilot holes in the door where the screws will go. Next, use a power screwdriver to attach the hinges to the door. Finally, close the door and mark where the screws should go on the cabinet frame. Drill pilot holes in the frame and attach the hinges using a power screwdriver.

How Far Should Hinges Be From Edge Of Cabinet Door?

This will depend on the width of the door and the type of hinge. In general, hinges should be about 1/4 to 1/2 inch from the edge of the door.

Where Should Cupboard Door Hinges Be Placed?

Ideally, cupboard door hinges should be placed on the inside of the cabinet so that they are not visible from the outside. This gives a cleaner and more polished appearance to the cabinet. However, if there is not enough room on the inside of the cabinet for the hinges, they can be placed on the outside, but they should be hidden behind a cover or trim.


In The End

There are a few different ways to install kitchen cabinet door hinges. The most common way is to use screws to attach the hinges to the cabinet door and the cabinet frame. Another way to install hinges is to use a dowel jig to drill holes in the door and frame, and then use dowels to attach the hinges. Finally, some hinges can be glued into place.

Leave a Comment

Your email address will not be published.