How To Install Oatey Toilet Flange Spacer

Toilet flange spacers are used to maintain the correct spacing between the toilet flange and the finished floor. This is necessary to ensure a proper seal between the toilet and the waste pipe. Spacers can be made from a variety of materials, but most are made from plastic or metal. The installation process is simple. The spacer is placed on top of the flange, and the toilet is then installed on top of the spacer.

How To Install Oatey Toilet Flange Spacer

Installing an Oatey toilet flange spacer is a very easy process. The first step is to remove the old toilet flange. This can be done by using a chisel and hammer to break the flange free from the floor. Once it is free, use a screwdriver to remove any screws that may be holding it in place. Next, use a saw to cut the PVC pipe flush with the floor. It is important to make sure that the saw is completely

-A toilet flange spacer -Tape measure -Pipe wrench -Adjustable wrench -Screwdriver -Putty knife -Drill -1 inch hole saw

  • Put toilet bolts in place
  • Remove old flange
  • Put new flange in place
  • Put washers and nuts on bolts put spacer on top of flange tighten all nuts and bolts

-To ensure proper installation, follow the manufacturer’s instructions for the oatey toilet flange spacer. -Some things you may need to complete the installation are a screwdriver, tape measure, and level. -The spacer is designed to fit over the existing toilet flange and provide additional height for a new wax ring. -Before installing the spacer, make sure that the old flange is in good condition and is level. -If it is not


Frequently Asked Questions

Should Toilet Flange Be Flush With Floor?

The toilet flange should be flush with the floor to ensure that the toilet is properly seated and that the water seal is maintained.

Does A Flange Have To Be Level With The Floor?

A flange does not have to be level with the floor, but it is typically recommended in order to ensure proper drainage.

How Do You Level A Toilet Flange On A Concrete Floor?

To level a toilet flange on a concrete floor, you can use shims to adjust the height of the flange.

Does It Matter If Toilet Flange Is Not Level?

Nope! It doesn’t matter if your toilet flange isn’t level. As long as it’s installed correctly and is flush with the floor, your toilet will function properly.

How Much Space Should Be Between Toilet Flange And Floor?

There should be at least a 1/2 inch gap between the toilet flange and the floor to ensure proper flow of waste.

Should The Flange Be Level With The Floor?

There is no right or wrong answer to this question as it depends on personal preference. Some people may prefer the flange to be level with the floor so that it is less visible, while others may prefer to have it slightly elevated so that any water or liquid that accumulates will run off rather than pool around the toilet.


To Summarize

Oatey toilet flange spacers are an easy way to secure a toilet flange to the floor. Spacers can be inserted between the flange and the floor, which will help to keep the flange in place and prevent it from moving. This will help to create a tight seal between the toilet and the floor, and will help to prevent any leaks.

Leave a Comment

Your email address will not be published.