How To Lower Humidity In Curing Jar

Humidity can be a real problem when curing marijuana. The right humidity level is critical to the curing process, and too much or too little moisture can ruin your plants. Fortunately, there are ways to lower the humidity of a curing jar so it’s just right for your plants. Depending on the size of your grow space, you might not have the options we mentioned here. It’s also important to note that lowering humidity is risky business because if it gets too low and your plants aren’t ready, they could suffer irreversible damage. If you have any doubts about whether you should try these techniques or not, consult an expert before proceeding. Here are 5 ways to lower humidity in a curing jar:

Turn on the Fan

If you have a fan in your grow room, you can use it to help lower the humidity. Just make sure you don’t put the fan directly over the jars, or they could get too dry. If the humidity level gets too low, your plants will dry out too quickly, so you want to make sure you’re not drying out your plants too quickly. If you don’t have a fan, you can turn on a small oscillating fan in your grow room. Turn the fan on during the day and off at night to help regulate the humidity in your grow room. A fan may not be enough to fully lower the humidity in a small grow room, but it will help a lot and is better than nothing.

Dampen the Jars

If the humidity in your grow room is too high, you can try dampening the jars. Just make sure the water you use is clean and that you don’t leave the jars sitting in water. Place the jars on a paper towel or something else that will help wick the water away from the jars. You may have to do this a few times throughout the day to get the humidity down to the right level. Make sure to monitor the humidity level in the room to make sure it doesn’t get too low. This is a good option to try if you don’t have a fan in your grow room. A fan is generally more effective at lowering the humidity level, but if you don’t have a fan, this is a good alternative. If the humidity level gets too low, you can try placing the jars under a humidifier.

Ventilation Mask

You can also wear a ventilation mask while you’re in the grow room, which will help lower the humidity level in a curing jar. The mask is designed to filter out excess humidity, so it will help the jars dry out a bit faster. This is likely most effective in a small grow room or if you have a very big room with a lot of humidity. Just be careful not to wear the mask for too long since it is designed for short-term use. You can also wear a mask designed for swimming or diving. These masks can help lower the humidity level in a curing jar. You can also use a swimmer’s mask for scuba diving, which is designed for long-term use. You can wear one of these anytime you’re in the grow room, and it should help lower the humidity. If the humidity level gets too low, you can also dry out your jars a little more by taking them off the lid and placing them on the floor.

Place your plants outside

If you have a very large grow room, you may be able to place your jars outside. Make sure they’re out of direct sunlight, and keep them on a table or other surface that is at floor level. If you have a small grow room, you probably won’t be able to place your jars outside. Placing your plants outside may help lower the humidity level, but it could also increase it if the weather is very humid. It’s best to monitor the humidity level in your grow room to see if you need to take any action to correct it. If the humidity level gets too low, you can cover your curing jars with a damp cloth, paper towel, or t-shirt. Be careful not to completely cover the jars in case they get too moist.

Distilling Water

You can also try distilling water to lower the humidity in a curing jar. Place the water in the jars, and it will naturally lower the humidity level. You’ll have to refill the jars a few times each day, so it can be a bit time consuming. This method is only effective in a very small grow room, but it is generally less effective than other methods. It could be worth a try if you don’t have any other options. It’s generally best to use a method that lowers the humidity level more quickly.

Conclusion

Humidity is important for curing marijuana, but it can also be problematic if it’s too high or too low. There are a few ways you can lower the humidity in a curing jar, but you have to make sure it doesn’t get too low, or your marijuana will dry out too quickly. It’s best to lower the humidity slowly so that your plants don’t get damaged.

Leave a Comment