How To Make A Penny Coffee Table

This guide will show you how to make a simple and stylish penny coffee table. You will need: 1. A piece of plywood or MDF measuring at least 80x80cm 2. A jigsaw 3. Drill 4. 18 pennies 5. Clear sealant or varnish 6. Sandpaper 7. Paint (optional) 8. Brushes (optional)

How To Make A Penny Coffee Table

If you want to make a penny coffee table, the first thing you need to do is find a sturdy surface to use as your table top. Once you have found a suitable surface, you will need to cover it with a layer of pennies. Make sure that the pennies are tightly packed and that there are no gaps in between them. Once the pennies are in place, you can seal them in with a layer of epoxy resin. allow the epoxy resin to dry completely

-Tape measure -Plywood -Circular saw -High-grit sandpaper -Stain or paint -Paintbrush -Protective gear -Coffee table base -Penny coins

  • Find a large coffee table book at a thrift store
  • Lay the book flat on a surface paint the entire book white let the paint dry turn
  • Remove the cover of the book and discard

– Choose a flat, sturdy surface for your table top. – Find a cylindrical container that is the same circumference as your tabletop. – Cut the bottom off of the container and sand down any sharp edges. – Use a strong adhesive to attach the container to the center of your tabletop. – Cover the container with felt or fabric to protect your coffee table’s surface and to create a finished look.


Frequently Asked Questions

What Do I Need To Make A Penny Table?

There are a few things you’ll need in order to make a penny table. Firstly, you’ll need a wooden board or tabletop that’s at least 24″ by 48″, although 36″ by 72″ is preferable. You’ll also need a jigsaw to cut the board, wood glue, clamps, and a drill with a 1/2″ bit. Finally, you’ll need around 100-125 pennies.

How Do You Make A Penny Bar Top?

Place a sheet of wax paper over a work surface. Arrange the pennies in a single layer on the wax paper. Melt chocolate chips in a microwave-safe bowl or in a saucepan set over low heat, stirring occasionally. Pour the melted chocolate over the pennies and spread it evenly. Freeze for 30 minutes or until firm. Break the penny bar into pieces.

How Do You Attach Pennies To Wood?

Pennies can be attached to wood using a number of methods. One popular method is to use a strong adhesive, such as epoxy, to attach the penny to the wood. Another method is to use a nail or screw to attach the penny to the wood.


Taking Everything Into Account

This easy to follow tutorial shows how to make a penny coffee table with just a few materials and tools. The finished table is a beautiful and unique piece of furniture that can be used in any room of the house.

Leave a Comment

Your email address will not be published.