How To Make Wooden Planters From Decking

There are a few ways to make wooden planters from decking. The first is to use the decking itself as the sides of the planter, and build a bottom out of something else. The second is to cut the decking into strips and then use those strips to build the sides and bottom of the planter. The third is to buy a pre-made planter and put the decking on top.

How To Make Wooden Planters From Decking

There are a few ways to make wooden planters from decking. One way is to use the decking boards themselves to create the sides of the planter. This can be done by cutting the boards to size and then securing them together with screws or nails. Another option is to use pre-made wooden boxes or crates as the base for the planters. The decking can be attached to these boxes using screws or nails. Finally, if you don’t want to use actual deck

-Tape measure -Circular saw -Plywood -Ruler or a straight edge -Stapler -High-grit sandpaper -Paint or a sealant -Potting soil – Plants

  • Use a jigsaw to cut out a shape
  • Cut the decking boards to the desired length with a circular saw
  • Drill two or three drainage holes in the bottom of each planter with a power drill

– consider the size of the planter you want to make and the amount of decking you have available – if you want a square or rectangular planter, use a straight edge to draw out the shape on the decking – use a jigsaw to cut out the shape of the planter – if you want a round planter, use a compass to draw out the desired diameter and then use a jigsaw to cut out the circle – sand all rough edges of


Frequently Asked Questions

Can I Use Decking To Make A Planter?

Yes, you can use decking to make a planter. You will need to cut the decking to the desired size and then use a drill to make drainage holes in the bottom. You can then fill the planter with soil and plants.

Can I Use Decking Boards For Raised Beds?

Yes, you can use decking boards for raised beds. Decking boards are typically made from pressure-treated lumber and will last for several years.

How Do You Make A Planter Out Of Old Decking?

One way to make a planter out of old decking is to cut the decking into strips, then use a jigsaw to create the desired shape for the planter. The strips can then be nailed or screwed together.


To Review

Making wooden planters from decking is a simple process that can be completed in a few hours. First, cut the decking to the desired size and shape using a saw. Then, drill drainage holes in the bottom of the planter and attach a bottom piece. Finally, seal the planter with a coat of wood sealant.

Leave a Comment

Your email address will not be published.