How To Pour Concrete Over Blacktop

Pouring concrete over blacktop is a process of laying a layer of concrete over an existing surface, such as asphalt or concrete. This is often done to create a smooth, even surface for other purposes, such as paving a driveway or patio. The process of pouring concrete over blacktop is relatively simple and can be completed with basic tools and supplies.

How To Pour Concrete Over Blacktop

There are a few things that need to be taken into consideration when pouring concrete over blacktop. The most important is that the substrate, or surface that the concrete will be poured on, must be level. If it is not, the concrete will not be flat and could cause problems down the road. Additionally, the temperature of both the substrate and the concrete must be similar. If they are not, the concrete could crack as it sets. Finally, it is important to use the correct ratio

-Concrete mix -Trowel -Mason’s line or chalk line -Ruler or tape measure -Circular saw -Drill -1 inch hole saw -Pipe cutter -Sledgehammer -Heavy duty post hole digger -Shovel -Wheelbarrow -Level

  • Clean the surface of the blacktop to be poured on to remove any dirt, debris, or oil
  • Mix the concrete according to the instructions
  • Pour the concrete over the blacktop, starting in one corner and working

-Pouring concrete over blacktop can be a difficult task, but with the right tools and instructions, it can be done effectively. -One of the most important things to consider when pouring concrete over blacktop is the weather. The concrete must be poured when the weather is warm and dry. -Another thing to consider when pouring concrete over blacktop is the preparation of the surface. The blacktop must be clean and free of any debris or oil spills. -The final


Frequently Asked Questions

What Do You Put Between Asphalt And Concrete?

There are a variety of materials that can be used as a base layer between asphalt and concrete, including crushed stone, gravel, and sand. The most common material, however, is a type of asphalt called hot mix.

Does Asphalt Bind To Concrete?

The binding of asphalt to concrete is an important aspect of pavement construction. The asphalt binds to the concrete to create a smooth, durable surface.

How Do You Seal A Gap Between Concrete And Asphalt?

There are a few ways to seal a gap between concrete and asphalt. One is to use a concrete sealant, which can be applied with a brush or roller. Another is to use an asphalt sealant, which can also be applied with a brush or roller. A third option is to pour hot tar into the gap.


In The End

Concrete can be poured over blacktop, but there are a few things that need to be taken into consideration. The biggest thing is that the blacktop must be completely smooth and even. If there are any bumps or lumps, the concrete will not settle correctly and could cause problems down the road. In addition, the temperature needs to be warm enough so that the concrete will set properly, but not too hot or it could cause the blacktop to melt.

Leave a Comment

Your email address will not be published.