How To Remove A Stuck Plumbing Snake

A plumbing snake is a metal or plastic cable that is inserted into a drainpipe to remove a blockage. If the snake becomes stuck, it can be difficult to remove. The following tips may help: – Use a plumber’s helper tool to hold the snake steady while you pull on it. – If the snake is metal, use a hacksaw to cut it in half. This will make it easier to remove. – Apply lubricant such as dish

How To Remove A Stuck Plumbing Snake

There are a few things that can be done to remove a stuck plumbing snake. One is to try wiggling the snake. Another is to use a mechanical jack to push the snake through the pipe.

-a plumbing snake -potassium hydroxide -a bucket -protective gloves -eye protection -a face mask

  • Insert the snake into the drain opening and push and twist it until you feel it hit the clog
  • Place a bucket under the drain to catch the water and snake
  • Keep pushing and twisting the snake until it breaks

-Ensure that the plumbing snake is completely inserted into the drain pipe before rotating it -Apply gentle pressure to the snake while rotating it in order to help it break free from the obstruction -If the plumbing snake becomes stuck again, repeat the previous steps until it is free


Frequently Asked Questions

How Do You Untangle A Sewer Snake?

If a sewer snake becomes tangled, the first step is to try to free it by hand. If that doesn’t work, a plumber may use a pipe wrench or other tool to try to free the snake. If the snake is still stuck, the plumber may have to cut it free.

How Do You Get A Snake Out Of The Corner Of A Drain?

The best way to get a snake out of the corner of a drain is to use a long metal pole to snag it by the head and pull it out.

How Do You Rewind A Drain Snake?

There is a manual crank on the end of the drain snake that you can use to rewind the cable.

How Do You Get A Snake To Go Down A Pipe?

You can use a stick to prod the snake and guide it down the pipe.

How Do You Get A Snake Past The Bend In The Pipe?

If the snake is small enough, it can be coaxed through the bend in the pipe by gently guiding it through with a stick. If the snake is too large to fit through the opening, then a larger pipe must be found that the snake can fit through.

How Do You Unstick A Drain Snake?

The best way to unstick a drain snake is to pour hot water down the drain while pushing the snake up and down.


In Summary

If you have a plumbing snake that is stuck in your pipes, there are a few things you can do to try and remove it. First, try using a breaker bar or pipe wrench to loosen the snake. If that doesn’t work, you can try using a hacksaw to cut the snake in half. If neither of those methods work, you can try calling a plumber to help you remove the snake.

Leave a Comment

Your email address will not be published.