How To Remove Tub Spout Without Set Screw

Removing a tub spout without a set screw can be a challenge, but it can be done. The first step is to identify the type of tub spout that is installed on your tub. There are three types of tub spouts: threaded, slip-fit, and compression. If your tub spout is threaded, you will need to remove the set screw in order to remove the spout. If your tub spout is slip-fit or compression, you will need to

How To Remove Tub Spout Without Set Screw

There are a few ways to remove a tub spout without a set screw. One way is to use a wrench. Another way is to use a pipe wrench. Another way is to use a screwdriver. Another way is to use pliers.

-Tub spout -Wrench -Channel locks -Hammer

  • If the tub spout is stuck, use a hammer and chisel to break the seal between the spout and pipe
  • Use an adjustable wrench to loosen the tub spout from the pipe
  • Pull the tub

-If the tub spout doesn’t have a set screw, you may be able to remove it by using a wrench. -First, locate the nut at the base of the spout. -Then, use a wrench to loosen the nut and remove the spout.


Frequently Asked Questions

What Is A Slip Fit Tub Spout Connection?

A slip fit tub spout connection is a type of tub spout connection in which the tub spout is attached to the pipe by slipping over the pipe and then being secured in place with a nut. This type of connection is relatively easy and quick to install, and it does not require any welding or soldering.

How Do I Unscrew My Bathtub Faucet?

There is usually a small Allen wrench or screwdriver that comes with the faucet. If not, a small, flathead screwdriver should work.

How Do You Remove A Slip On Tub Spout Adapter?

There are a few ways to remove a slip-on tub spout adapter. One is to use a wrench to unscrew the adapter from the faucet. Another is to use pliers to pinch the sides of the adapter and pull it off.


In The End

Removing a tub spout without a set screw can be a challenge, but it can be done. First, try to pry the spout off using a flat-head screwdriver. If that doesn’t work, you may need to use a hacksaw to cut through the retaining nut. Be careful not to damage the threads on the spout or the pipe.

Leave a Comment

Your email address will not be published.