How To Replace A Moen 1224 Cartridge

If your Moen 1224 cartridge is leaking, it’s likely that the O-rings have worn out and need to be replaced. The process of replacing a Moen 1224 cartridge is relatively simple, and can be done in just a few minutes with the right tools.

How To Replace A Moen 1224 Cartridge

To replace a Moen 1224 cartridge, you will need to remove the handle from the faucet, then use a wrench to remove the old cartridge. You can then install the new cartridge by following the same steps in reverse. Be sure to apply pipe tape to the threads of the new cartridge before installing it.

– a cartridge puller – channel locks – a hammer – screwdriver – pliers – a bucket or container to catch the water

  • Remove the handle from the faucet
  • Unscrew the cartridge from the faucet
  • Remove the old cartridge insert the new cartridge into the faucet screw the cartridge into the fauc

-Turn off the water supply to the faucet by closing the valve under the sink. -Open the faucet to release any water pressure in the lines. -Remove the handle grip by unscrewing it counterclockwise. -Remove the retaining clip that holds the cartridge in place by using a small screwdriver. -Pull out the old cartridge and discard it. -Insert the new cartridge into the faucet and push it up until it snaps


Frequently Asked Questions

How Do I Remove A Recessed Faucet Cartridge?

The process of removing a recessed faucet cartridge will vary depending on the brand and model of your faucet. However, most cartridges can be removed by unscrewing them with a wrench.

How Do You Remove The Cartridge From A Moen 1224 Faucet?

The cartridge is removed by unscrewing the cartridge adapter from the faucet body. The adapter is then loosened from the cartridge by turning it counterclockwise. The cartridge can then be pulled out of the faucet.

How Do You Remove A Stuck 1224 Cartridge?

There are a few ways to remove a stuck cartridge. One way is to use a hairdryer. Turn the hairdryer on to high and hold it about six inches from the cartridge. Move the hairdryer back and forth until the cartridge pops out. Another way is to use a vacuum cleaner. Turn the vacuum cleaner on to high and hold the nozzle against the cartridge. Move the vacuum cleaner back and forth until the cartridge pops out.

Is Moen 1224 The Same As 1224 B?

The Moen 1224 and the Moen 1224B are both single handle kitchen faucets. They are both made of brass and have a chrome finish. The only difference between the two is that the 1224 has a 6″ spout reach, while the 1224B has an 8-1/2″ spout reach.

How Do I Change The Cartridge On My Moen Single Handle Faucet?

To change the cartridge on a Moen single handle faucet, you will need to remove the faucet handle and the valve cover. The cartridge is located in the center of the valve and can be removed by unscrewing it.

How Do You Change A Moen 1224 Faucet Cartridge?

Replacing the cartridge on a Moen 1224 faucet is a fairly simple process. The cartridge is located in the middle of the faucet and is held in place by two screws. It can be removed by unscrewing the screws and pulling it out. The new cartridge can then be inserted by reversing the process.


Summing-Up

It is possible to replace a Moen 1224 cartridge without any help. All that is needed is the cartridge itself, a screwdriver, and about 10 minutes of time. The steps are simple: unscrew the old cartridge, remove it, insert the new cartridge, and screw it into place.

Leave a Comment

Your email address will not be published.