How To Snake A Grease Trap

A grease trap is a device that is used to catch and hold FOGs (fats, oils, and grease). This device is usually installed in restaurants and other food service establishments where there is a high volume of wastewater.

How To Snake A Grease Trap

grease traps are devices that are used to intercept greasy waste water from a kitchen before it enters the municipal sewer system. The trap contains a layer of oil or fat that will float on top of the wastewater and will capture any grease or food particles. The process of cleaning a grease trap can be difficult because the grease and food particles can be hard to remove. One way to clean a grease trap is to use a snake. A snake is a long, flexible tube that can be

Grease Trap: -a plumbing device used to collect FOG (fats, oils, and grease) from wastewater before it enters the sewage system -must be cleaned regularly to avoid clogs

  • Locate the trap and remove the lid
  • Insert a snake into the trap and work it through the gunk remove the snake and dispose of the gunk
  • Close off the main water supply to the trap

– Keep your grease trap clean by regularly flushing it with hot water and detergent. – Make sure that you use a plunger to dislodge any food particles or grease build-up. – If necessary, use a snake to clear the grease trap of any blockages.


Frequently Asked Questions

What Will Dissolve Grease?

Grease is a type of lipid that is soluble in organic solvents. This means that it will dissolve in substances such as alcohols and chlorinated hydrocarbons.

What Is The Best Degreaser For Pipes?

There is no definitive answer to this question as various degreasers work better on different types of pipes. However, a general degreaser that is effective on most pipes is a household cleaner such as bleach or ammonia.

How Do You Clear A Clogged Grease Trap?

To clear a clogged grease trap, one would use a plunger to dislodge the blockage. If that does not work, then one might try using a snake or auger to clear the clog.

Does A Drain Snake Work For Grease?

Drain snakes are generally effective at removing grease from drains, but there are a few things to keep in mind. First, the snake needs to be the right size for the drain; if it is too small, it will not be able to remove the grease. Second, if there is a lot of grease in the drain, it may take more than one attempt to clear it. Finally, if the grease has built up over time, it may be necessary to use a chemical cleaner to break it up before using the snake.

Why Is My Grease Trap Not Draining?

One possible reason for a grease trap not draining is that it is full. If the grease trap is full, the water will not be able to flow through it and out the drain.

Do Drain Snakes Work On Grease?

Drain snakes work on grease by dislodging the grease buildup in the drain pipe and flushing it away. The snake typically has a corkscrew-like head that grabs onto the grease and pulls it free.


To Summarize

Snake a grease trap by inserting a long, thin object into the drainpipe and wriggling it around until the clog is dislodged. Be sure to wear gloves to protect your hands from the grease and debris.

Leave a Comment

Your email address will not be published.