How To Straighten A Roll Of Pex Tubing

Straightening a roll of PEX tubing is a relatively easy process. You will need a few household items to complete the task. First, you will need a bucket or container to hold water. Second, you will need a straight edge such as a ruler or a piece of wood. Finally, you will need some type of clamping device such as pliers, Vise-Grips, or locking pliers. To straighten the tubing, fill the bucket with

How To Straighten A Roll Of Pex Tubing

Straightening a roll of PEX tubing can be accomplished with a few simple steps. Begin by finding the kink in the tubing and gently pulling it until it is straight. If the kink is too tight, use a heat gun or hair dryer to soften the plastic and make it more pliable. Once the kink is gone, use a pair of pliers to pinch the tubing together and hold it in place. This will keep the tubing from kinking again.

-Pex tubing -Straight edge -Tape measure -Marker -Pipe cutter -File -Ruler

  • Straighten the tubing by hand
  • Unroll the desired length of tubing
  • If needed, use a heat gun to straighten the tubing
  • Use a pipe cutter to cut the tubing to the desired length

-Straighten the tubing by hand before installing it -Make sure the tubing is straight before cutting it -If the tubing is not straight, use a pipe or tubing bender to bend it into shape


Frequently Asked Questions

How Do You Straighten Pex Rolls?

The process of straightening PEX tubing is accomplished using a variety of methods including heat, pressure, and vibration. Vibration is often the preferred method as it is the least likely to cause damage to the tubing.

Can You Use Pex If It Kinked?

If a PEX pipe is kinked, it can still be used, but it is not recommended. If the kink is not too severe, the pipe can be straightened and the flow of water restored. If the kink is more severe, the pipe may need to be replaced.

Can Pex Be Heated And Bent?

PEX tubing can be heated and bent, but it is not recommended. Heating PEX tubing can cause it to expand and become brittle.


To Summarize

There are a few ways to straighten out a roll of PEX tubing. One way is to use a piece of PVC pipe. Another way is to use a hose clamp.

Leave a Comment

Your email address will not be published.