How To Tap Into Natural Gas Line

If you’re looking to tap into a natural gas line, the process can be a little complicated. You’ll need to locate the shut-off valve for the gas line, and then use a pipe cutter to cut through the pipe. You can then attach a T-fitting to the end of the pipe, and use a hacksaw to cut off the excess pipe. Finally, you’ll need to attach a connector to the T-fitting and connect it to your gas appliance.

How To Tap Into Natural Gas Line

If you are looking to tap into a natural gas line, you will need to contact your local utility company. They will be able to help you identify the location of the gas line and provide you with the necessary instructions and equipment to complete the connection.

-Tape measure -Pipe wrench -Hacksaw -Tubing cutter -Propane torch -Soldering iron – flux -lead solder – Chisel

  • Turn off the main valve to the house
  • Check if the gas line is accessible. if it’s not, you’ll need to get in touch with your local utility company
  • Open the gas meter lid

-Check with your local gas company to see if tapping into a gas line is an option -If it is, they will be able to provide you with the proper instructions and equipment -Be sure to have an accurate map of your gas line so you can avoid damaging it while drilling -If you are not comfortable tapping into a gas line yourself, hire a professional


Frequently Asked Questions

What Are Press Fittings Used For?

Press fittings are used to join two pieces of pipe without the need for welding or soldering. The pipes are inserted into the fitting and then a press tool is used to apply pressure, forcing the pipes to deform and create a watertight seal.

Can You Use Push To Connect Fittings On Gas Line?

Yes, push-to-connect fittings can be used on gas lines. Push-to-connect fittings work by pressing the fitting onto the tubing until it clicks, forming a watertight seal. This type of fitting is convenient and easy to use, and it does not require any tools or special skills.

What Kind Of Fittings Do You Use For Natural Gas?

The fittings used for natural gas are typically made of brass and are either compression fittings or flare fittings.

Can Press Fit Fittings Be Used On Gas?

Yes, press fit fittings can be used on gas. They are often used for connecting copper tubing to gas appliances, such as stoves, ovens, and dryers.


To Summarize

When tapping into a natural gas line, always contact your local utility company first. They will be able to advise you on the best way to proceed and may even be able to help with the installation.

Leave a Comment

Your email address will not be published.