How To Uncoil Pex Tubing

When working with pex tubing, it is important to know how to uncoil it properly. If not done correctly, the tubing can kink and become unusable. Here is a simple guide on how to uncoil pex tubing: 1. Begin by finding the end of the tubing that is kinked or twisted. 2. Carefully remove the kinked or twisted section by gently pulling it apart. 3. Once the kink

How To Uncoil Pex Tubing

A coil of PEX tubing is easy to uncoil by spreading the coils out and gently pulling the tubing from the center. This can be done by hand or with a tool such as a tubing cutter. If there is any kink in the tubing, it can be straightened by gently working it back and forth.

Tools: -Tubing cutter -Pipe wrench -Channel locks -Hacksaw -File Materials: -PEX tubing

  • Mark fittings at each end of tubing punch a hole in the tubing at each marked location insert fittings and secure with set screws
  • Cut tubing to desired length
  • Uncoil tubing from spool

below -If the tubing is kinked, use a pair of pliers to straighten it out. -To uncoil the tubing, hold one end in each hand and slowly let go. -If there are any twists in the tubing, untwist them by hand. -If the tubing is coiled too tightly, use a pair of pliers to loosen the coils.

Frequently Asked Questions

How Do I Stop Mice Chewing My Pex?

There are a few things you can do to try and stop mice chewing your PEX. One is to try and seal off any areas where they may be getting in, such as using caulking or steel wool. You can also try using a deterrent, such as peppermint oil or citrus peel. Finally, you can try trapping the mice to remove them from your home.

Can You Use Pex If It Kinked?

Yes, you can use PEX if it kinked as long as the kink is in the middle of the pipe and not at a fitting. If the kink is at a fitting, then you will need to replace the fitting.

Can You Break And Freeze Pex?

Yes, you can break and freeze PEX.

In Closing

When uncoiling PEX tubing, it is important to keep the coils as tight as possible to avoid kinks and crimps in the tubing. It is also important to keep the tubing straight while coiling, to prevent twisting.

Leave a Comment

Your email address will not be published.