How To Get Sand Out Of Bathtub Drain
If your bathtub drain is clogged with sand, it’s probably because you use it as a catch-all for hair, dirt, and other debris from your shower. Even if you’re careful about keeping these things out of the tub, they can easily fall in unnoticed. The result? A clogged bathtub drain. Although this problem can be annoying and inconvenient, there are some simple ways to unclog that drain. The key is to act fast so the clog doesn’t get worse and cause even more problems with your plumbing. Here are four steps that will help you get rid of sand in your bathtub drain once and for all.
Step 1: Try Hair Conditioner
If your sand clog is pretty small and you just need to get it out, try using a little bit of hair conditioner. Just squirt a small blob into the clog. Then, use a pair of chopsticks to push it through until it comes out of the other side. Repeat until the clog is cleared. Try not to use too much conditioner because it can leave a mess on your tub. If you have a larger sand clog, this trick is probably not going to work. You may want to try one of the other methods listed below. Still, this is a good first step if you’re not sure how bad the clog is. This method can help you decide whether a more involved method is necessary.
Step 2: Use Baking Soda and Vinegar
If your sand clog is bigger or really won’t budge with a little conditioner, you may need something with a bit more power. One good option is to mix baking soda and vinegar. First, pour the baking soda down the drain. Then, pour the vinegar on top. Let the mixture sit for 15 to 20 minutes. Next, pour boiling water down the drain to loosen the clog. If the clog is really bad, you may have to repeat this process. This method can be really effective for loosening clogs and getting rid of sand. Keep in the mind, though, that this method won’t actually remove the sand. You’ll still have to get it out.
Step 3: Try a Drain Snake
If the sand clog is bad enough that a baking soda and vinegar mixture doesn’t work, you may want to try a drain snake. A drain snake is a long tool that can be pushed into the clog to break it up and pull it out. You can rent a drain snake at most home improvement stores. You may want to bring the clog with you so you can pick the right tool. Using a drain snake can be a little bit tricky. You should wear gloves and eye protection when using it. You may also want to put a bucket or a rag underneath the snake to catch the sand as you pull it out. Once you’ve cleared the clog, you should also clean the drain snake with warm water and vinegar. This is one of the most effective ways to get rid of sand in your bathtub drain. It’s also one of the easiest ways to unclog your tub. Still, it might be a good idea to have a plumber do this for you. You may not have the right tools or know-how to do it safely.
Step 4: Contact a Professional
If you try all of these methods and nothing works, you may want to call a professional. A plumber can use special tools to break up the clog and clear the drain. They may also be able to figure out why the drain got clogged in the first place. They can give you advice on how to avoid this problem in the future. This can be a good option if you don’t know what to do or you don’t have the time or tools to fix the problem yourself. A clogged bathtub drain can be a real pain. If you take care of your plumbing, though, you can avoid these issues. Here are a few ways to get rid of sand in your bathtub drain. Hopefully, one of these methods works for you. If not, don’t panic. You can always contact a professional.